Epoxy Floor Transformation- dolphin 1/4″ Full Chip System

Once you’ve installed epoxy flooring, you’ll need to wait for days for it to cure completely. Ideally, the epoxy flooring needs a long duration to dry completely in warm conditions.

Sometimes, an installation takes as much as 30 days to cure fully. That can inconvenience you if you need to use your garage sooner.

Other flooring options take less time to dry and harden. One of the top polyurea benefits is its ability to dry within 4 to 8 hours. In 24 hours, you can drive your car over the flooring.

Unlike the name suggests, epoxy flooring is not actually a floor on its own. One needs to install concrete, steel, or wooden flooring first and then add epoxy coating on top. Using epoxy is merely a temporary fix.

As the epoxy coat starts to wear away, you’ll need to install a new one. One of the best ways to avoid frequent replacements of epoxy flooring is by opting for the completely solid option. The product also comes in water-based and solvent-based options, but these two aren’t nearly as sturdy as the solid option.

But even the 100 percent solid epoxy flooring isn’t as durable as the best floor coatings in the market. In particular, polyurea coatings have a much longer lifespan.

The top reason you’re choosing a floor coating is that you want to protect your garage flooring. Installing epoxy floor coatings isn’t the best option to help you do so. That’s because epoxy performs poorly in high traffic and impact areas, such as your garage.

After a short time, you’ll start to notice that the surface cracks and chips easily. That means you have to replace the coating frequently, which translates to additional costs over time.

Another significant setback of epoxy floor coating is the amount of time it takes to complete the installation process. Preparing the floor itself for epoxy coating installation is quite tedious. You have to remove any oils, grease, and solvent from the concrete floor completely before you can apply the epoxy coat.

The installation must follow strict instructions for you to get the desired results. Humidity levels have to be as low as possible, or the moisture will damage the floor. Moreover, you must wait until the floor dries completely or risk having to redo it again.

Few floor coatings require as much maintenance as epoxy. You’ll need to purchase special cleaning chemicals. Besides, you need to have proper protective gear when doing repairs or cleaning the floor with these chemicals.

With epoxy flooring, you need to be constantly on the lookout for any chemical spills, including oil, gasoline, and antifreeze. These substances can alter the appearance of your floor unless you clean them quickly.

Where epoxy flooring is installed in a warehouse, extra protection in the form of welding mats may be necessary.

The best garage floor coating should have few maintenance needs. Polyurea, for instance, is much more resistant to abrasions, physical impact, and abrasions.

Unlike such flooring options as hardwood, epoxy flooring feels cold when you walk on it barefoot. You can solve this problem by installing an underfloor heating system, but that means spending more on power.